PERANCANGAN TUNGKU RE-HEATING PORTABLE

Armila Armila; Rudi Kurniawan Arief; Ranggi Efnal Putra

doi:10.31869/rtj.v6i2.4206

PERANCANGAN TUNGKU RE-HEATING PORTABLE

Armila Armila, Rudi Kurniawan Arief, Ranggi Efnal Putra

Sari

Re-heating furnace is a furnace that is used as a metal heater in the forging process. Re-heating furnace is one of the needs of the material technology laboratory to carry out the practical process of metal forming with plastic deformation as a heating medium for the forging process. The manufacture of this re-heating furnace is to make tools using medium carbon metal with a target temperature of 800℃. The process of making the furnace uses K300 type concrete material, 8mm reinforcing steel so that the furnace can be strong and durable. The furnace manufacture has succeeded in reaching a temperature of 302.8°C in 10 seconds using an air velocity of 15.4 km/h, and reaching a temperature of 931.8°C in 100 seconds using an air velocity of 25.7 km/h. This Re-heating Furnace can heat low-high carbon steel for forging process.

Teks Lengkap:

PDF

Referensi

Y. Umardhani and Z. Fuad, Muhammad, “Forging : Pengertian, Jenis dan Aplikasinya

A. Rachmat and M. Sulaeman, “Pembuatan tungku peleburan alumunium dengan pemenfaatan limbah tempurung kelapa sebagai bahan bakar,” J. Ensitec, vol. 07, no. 01, pp. 491–499, 2020.

D. Purwanto and R. A. Nasa, “Perancangan Tungku Pemanas Dengan Menggunakan Kanthal a1,” Media Mesin Maj. Tek. Mesin, vol. 22, no. 1, pp. 13–21, 2021, doi: 10.23917/mesin.v22i1.12462.

M. A. Almu, S. Syahrul, and Y. A. Padang, “ANALISA NILAI KALOR DAN LAJU PEMBAKARAN PADA BRIKET CAMPURAN BIJI NYAMPLUNG (Calophyllm Inophyllum) DAN ABU SEKAM PADI,” Din. Tek. Mesin, vol. 4, no. 2, pp. 117–122, 2014, doi: 10.29303/d.v4i2.61.

D. P. Mangesa, B. V. Tarigan, W. Hasan, J. T. Mesin, and U. N. Cendana, “Pengaruh Posisi Jebakan Panas pada Tungku Terhadap Listrik yang Dihasilkan,” vol. 04, no. 02, 2017.

A. Hantaran, K. Konduksi, R. Dan, and C. L. Belakang, “ANALISIS HANTARAN KALOR KONDUKSI, KONVEKSI, RADIASI DAN PENGARUH KALOR TERHADAP BENDA,” pp. 1–7, 2021.

M. Dr. Drs. Jamaluddin P, PERPINDAHAN PANAS. Makassar, 2018.

DOI: https://doi.org/10.31869/rtj.v6i2.4206