DESAIN DAN ANALISIS SPECIAL TOOL POWER SECTION PT6-42 MENGGUNAKAN METODE ELEMEN HINGGA

Wira Gauthama; Ready Kresna Nanda Suprapto

doi:10.31869/rtj.v5i2.3176

DESAIN DAN ANALISIS SPECIAL TOOL POWER SECTION PT6-42 MENGGUNAKAN METODE ELEMEN HINGGA

Wira Gauthama, Ready Kresna Nanda Suprapto

Sari

The goal of this research is to use the finite element method to develop and analyze a frame for supporting the PT6-42 power section. The software SolidWorks 2020 was used to do the static analysis. ASTM 500 and ASTM A36 were utilized for the frame. The load used is 95 kg, which is the power section's burden. The results of the analysis show the design. The safety factor values obtained by using ASTM A36 and ASTM A500 materials on special tools with a thickness of 10 mm are 2.06 and 2.60, respectively. Frame with a size of 5 mm is not recommended because they are only safe to withstand static loads.

Teks Lengkap:

PDF

Referensi

Agus Adi, I. N., Dantes, K. R., & Nugraha, I. N. P. (2018). Analisis Tegangan Statik Pada Rancangan Frame Mobil Listrik Ganesha Sakti (Gaski) Menggunakan Software Solidworks 2014. Jurnal Pendidikan Teknik Mesin Undiksha, 6(2), 113. https://doi.org/10.23887/jjtm.v6i2.13046

Dobrovolsky, V., & Zablonsky, K. (1978). Machine elements : a textbook. Peace Publisher.

Hamzah, A. (2021). Penggunaan Metode Elemen Hingga Pada Struktur Grid Dengan Program Freemat. Rang Teknik Journal, 4(1), 83–88.

Hardiputra, F., Djafar, A., & Sulistijono. (2018). Perancangan As Roda Troli Pemanjat Tangga Berdasarkan Analisis Tegangan Dan Faktor Keamanan Shaft Design for Stair-Climbing Hand Truck Based on. SNITT- Politeknik Negeri Balikpapan 2018, 312–316.

Kasda, K., & Albayan, B. (2018). Analisis Rangka Penyiang Gulma Menggunakan Metoda Elemen Hingga. MESA (Teknik Mesin, Teknik Elektro, Teknik Sipil, Teknik Arsitektur), 3(1), 17–22.

Kurowski, P. M. (2018). Engineering Analysis with SOLIDWORKS Simulation 2018. Stephen Schroff.

Morrison, M. L. (2020). A ductile fuse for special concentrically braced frames. Proceedings of the 9th International Conference on Advances in Steel Structures, ICASS 2018, September. https://doi.org/10.18057/ICASS2018.P.149

Sajid, H. U., & Kiran, R. (2018). Influence of High Stress Triaxiality on Mechanical Strength of ASTM A36, ASTM A572 and A992 steels. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2018.05.018

Sasmito, A. (2018). Disain Kekuatan Sambungan Hoop Pillar Dan Floor Bearer Pada Struktur Rangka Bus Menggunakan Solidworks. Simetris: Jurnal Teknik Mesin, Elektro Dan Ilmu Komputer, 9(1), 657–670. https://doi.org/10.24176/simet.v9i1.2023

Sudri, N. M., Nendissa, B. C., & Herawati, Y. (2012). Analisis Sistem Perawatan Komponen Generator Starter pada Mesin Pesawat di PT XYZ. Jurnal Teknik Dan Ilmu Komputer, 1(3), 287–293.

Suprapto, R. K. N., & Wibawa, L. A. N. (2021). Desain dan Analisis Tegangan Rangka Alat Simulasi Pergerakan Kendali Terbang Menggunakan Metode Elemen Hingga. Jurnal Teknik Mesin ITI, 5(1), 19. https://doi.org/10.31543/jtm.v5i1.559

Suprianto, G. (2011). Kualitas Keselamatan Penerbangan Indonesia. Jurnal INDEPT, 1(1), 4–6. http://jurnal.unnur.ac.id/index.php/indept/article/view/61

Wahyudi, N., & Fahrudi, Y. A. (2017). Studi Eksperimen Rancang Bangun Rangka Jenis Ladder Frame pada Kendaraan Sport. JEECAE (Journal of Electrical, Electronics, Control, and Automotive Engineering), 1(1), 71–75. https://doi.org/10.32486/jeecae.v1i1.15

WHITLOCK, M. (1942). Limiting Factors of Overhaul for Aircraft Engine. SAE Transactions, 50, 499–508. http://www.jstor.org/stable/44439220

Wibawa, L. A. N. (2019). Prediksi Umur Fatik Struktur Crane Kapasitas 10 Ton Menggunakan Metode Elemen Hingga. Media Mesin: Majalah Teknik Mesin, 21(1), 18–24. https://doi.org/10.23917/mesin.v21i1.9422

Wibawa, L. A. N. (2020). Desain Dan Analisis Tegangan Struktur Crane Kapasitas 10 Ton Menggunakan Metode Elemen Hingga. Jurnal Muara Sains, Teknologi, Kedokteran Dan Ilmu Kesehatan, 4(2), 201. https://doi.org/10.24912/jmstkik.v4i2.7006

Wibawa, L. A. N., & Diharjo, K. (2020). Pengaruh Beban terhadap Prediksi Umur Fatik Rangka Meja Kerja Balai LAPAN Garut Menggunakan Ansys Workbench. Jurnal Teknik Mesin ITI, 4(2), 57. https://doi.org/10.31543/jtm.v4i2.414

DOI: https://doi.org/10.31869/rtj.v5i2.3176